Compact IO Module TRIAC-8-C
£193.33 Exc. VAT
The 8-channel Triac module is used to send control signals to Triac field equipment.
8-channel analogue output module.
- Screwless installation with click-on DIN-rail communication bus and power connectors
- Push-in spring connectors for cables
- Individually detachable terminal blocks per channel
The 8-channel Triac module is used to send control signals to Triac field equipment. Its 8 individually configurable channels can send out control signals between 0 and 100%, and each has parametrisable safeguard values in case of a rupture in communication from a serial Modbus master controller.
T Bus connecter (Terminal C) required for MODBUS + and – connection along with other supply voltage 24VDC and consumes 15mA.
If more than 1 module is being installed, you only need one terminal connector, if connecting say 10 of the same or different modules, only one T Bus connector is required.
Communication: Modbus RTU (RS485) at speeds up to 57600 bps. Use no parity, 8 data bits and 1 stop bit. The module will auto-detect the communication speed of the bus (9600, 19200, 38400 or 57600 bps).
Modbus address: The address of the module can be set from 1 to 63 by changing the position of dip-switches 1-6. Each dip-switch represents a binary value, as indicated on the module and datasheet.
Modbus loop termination: On the last module, the Modbus loop must be closed by connecting a 120 Ω resistor between the A and the B side of the RS-485 loop.
TRIAC-8-C Fidelix
Analog out module
– 8 analog outputs
– Programmable default status in case of communication failure
– Programmable default status in case of communication failure
– Pluggable connection terminals
– RS-485 communication with Modbus protocol
– Mounting on DIN rail
TRIAC-8-C is used to control Triac devices.
Each of the 8 outputs is configured to give an output signal corresponding to 0-100% and can be set to take a predetermined value in the event of a communication error.
Quick and easy installation as the power supply and communication are integrated into the DIN rail.
Watch YouTube video:Â TRIAC-8-C-youtube
Technical information
Supply voltage: 24VDC (+/- 10%)
Current consumption: 5 mA + (8 x 3 mA)
Ambient operating temperature: 0 to +40ºC
Ambient humidity operation: Max 95%RH, non-condensing
Module size: 134 mm x 78 mm x 19 mm
Module weight: 90 g
Protection class: IP20
Communication speed: 9600 bps, 19200 bps, 38400 bps or 57600 bps
Address range: 1 – 63
Communication protocol: Modbus RTU
Resolution: 20 bits
Attenuation at 50 Hz: better than 110 dB
Resolution output: 0.1%
Max load per channel: 500 mA
-
BMS Parts You Tube
[embedyt] https://www.youtube.com/watch?v=xIk-O_HJ7zo[/embedyt]
BMS Parts PDF Download
| Weight | 0.90 kg |
|---|---|
| Dimensions | 13.4 × 1.9 × 7.8 cm |
1 review for Compact IO Module TRIAC-8-C
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
Related products
10 channel alarm integrator module 24Vac/dc – IO-ALM10-24
The IO-ALM10 series of Alarm Integrators monitor up to 10 Input Channels up to 24VAC/DC per channel and provide a relay output in the event of an alarm signal appearing on any one or more inputs.
The IO-ALM10 Alarm Integrators is self-powered from the alarm input and are designed for mounting on the TS35 (35mm Slotted Din Rail) section DIN rail.
LoRa Wireless RS485 transmitter or receiver with LCD screen – 1 Unit
The LoRaWAN Data Transmission Terminal is a universal communication interactive equipment that is designed and manufactured based on LoRa RF chip.
It integrates two interfaces of industrial standard RS485 and supports a variety of protocols to realise the data transmission between wired and wireless devices.
It supports LoRaWAN Class C protocol. It can be widely applied in the IoT, centralised metering and industrial control etc.
Peter –
Easy to install and so compact, I do like this.