Compact IO Module DI-16-C
£135.85 Exc. VAT
The 16-channel digital input module is used to read and detect digital signals for indication, alarm, or impulse measurement purposes.
Digital open collector output module, 16 inputs, max 100mA/channel.
- Screwless installation with click-on DIN-rail communication bus and power connectors
- Push-in spring connectors for cables
- Individually detachable terminal blocks per channel
The 16-channel digital input module is used to read and detect digital signals for indication, alarm, or impulse measurement purposes. Each channel can be individually configured, and has a green and red LED to show its current status. Connect the module to a serial Modbus master controller to get reliable and fast indications from your field equipment.
Below you will find a presentation of the Fidelix FdxCompact DI-16-C 16-Channel Digital Input module. How to connect, configure, use, communicate with, and interpret values and signals from the module.
T Bus connecter (Terminal C) required for MODBUS + and – connection along with other supply voltage 24VDC and consumes 15mA.
If more than 1 module is being installed, you only need one terminal connector, if connecting say 10 of the same or different modules, only one T Bus connector is required.
Communication: Modbus RTU (RS485) at speeds up to 57600 bps. Use no parity, 8 data bits and 1 stop bit. The module will auto-detect the communication speed of the bus (9600, 19200, 38400 or 57600 bps).
Modbus address: The address of the module can be set from 1 to 63 by changing the position of dip-switches 1-6. Each dip-switch represents a binary value, as indicated on the module and datasheet.
Modbus loop termination: On the last module, the Modbus loop must be closed by connecting a 120 Ω resistor between the A and the B side of the RS-485 loop.
DI-16-C Fidelix Digital input module
– 16 digital inputs
– Indication, alarm, and heart rate recording
– Galvanically isolated channels
– Multicolored LED indications
– Pluggable connection terminals
– RS-485 communication with Modbus protocol
– Mounting on DIN rail
The DI-16-C is used to read digital signals for indications, alarms or heart rate measurements.
Each channel can be configured individually and has a green and a red LED to show the current status.
Quick and easy installation as the power supply and communication are integrated into the DIN rail.
Watch The YouTube video: DI-16-C youtube
Technical information
Supply voltage: 24 VDC (+/- 10%)
Current consumption: 5 mA + (16×2 mA)
Ambient temperature operation: 0 to +40ºC Ambient humidity operation: Max 95%RH, non-condensing
Module size: 134 mm x 78 mm x 19 mm
Module weight: 90 g
Protection class: IP20
Communication speed: 9600 bps, 19200 bps, 38400 bps or 57600 bps
Address range: 1 – 63
Communication protocol: Modbus RTU
Supply scan voltage DI: 20 – 24 VDC
Scan current: 2 mA at 24 VDC / closed circuit
Allowed resistance open contact: 50 kΩ – ∞ (parallel) at 24 VDC scan voltage
Permitted minimum pulse length: Programmable, 5 ms – 1275 ms
-
BMS Parts You Tube
[embedyt] https://www.youtube.com/watch?v=xIk-O_HJ7zo[/embedyt]
BMS Parts PDF Download
| Weight | 0.90 kg |
|---|---|
| Dimensions | 13.4 × 1.9 × 7.8 cm |
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
Related products
24 Channel Digital Input Multiplexer – VFC input
The IOD24 module was created and designed to provide a cost-effective and efficient way of handling a large amount of digital input into a Building Management System (BMS). 24 Digital Inputs are multiplexed to provide a single analogue output (0-10V or 4-20mA) which is compatible with most open standard BMS controllers on the market currently.
EB-303 Current Bar
The EC is a current sensor for standard miniature circuit breakers (MCB). It is designed to fit any type of IEC standard MCB, Residual-Current Devices (RCD), and Residual-current Circuit Breakers with Overload protection (RCBO) capable of measuring devices up to 40A. The EC includes a current transformer (CT) with turn ratio of 1:1000 and a burden resistor of 10Ω. The EC does not interfere with or affect the function of the MCB.
Reviews
There are no reviews yet.