Rain Sensor with Integral Heater WL-RS1
£44.00 Exc. VAT
A range of single-zone water leak detection modules in DIN mounting carriers.
WL-RS1 Description
A range of single-zone water leak detection modules in DIN mounting carriers.
One or more detector tapes or cables to remote water sensors totaling up to 200m in length can be connected and receive an AC excitation signal to minimise corrosion.
A relay output is provided with an LED indicating the alarmed condition.
Specification
Connections to flying lead: Red, blue: To water detector (either polarity) – Yellow, green: Heater 24V AC or DC (either polarity, consumes 1W)
Dimensions: Body: 75 x 45 x 32mm – Bracket: 65 x 65mm – Mounting hole spacing: 31mm – Mounting hole diameter: 5mm
Materials: Bracket: Stainless steel – Body: ABS
Wiring connections:
- Red and blue to water detector
- Green and yellow to 24V AC or DC for heater
Rain Sensor Features:
- Detects rain
- Integral heater prevents dew formation
- Flying lead 1 meter
- Compatible with our Water Detector Modules
- Stainless steel bracket included
- Sealed to IP66
| Weight | 0.20 kg |
|---|---|
| Dimensions | 7.5 × 4.5 × 3.2 cm |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
Related products
Liquid Static Pressure Sensor 0/10Vdc
The PT603 range of Liquid Pressure sensors uses a piezo-resistive sensor and incorporates an IP65 connector for wiring with a ¼” BSP threaded connection. They are ideal for use in areas requiring exact pressure measurement, low hysteresis, and long-term stability in all applications where air, oil, or water is to be monitored.
Liquid Static Pressure Sensor 4-20mA
The PT603 range of Liquid Pressure sensors uses a piezo-resistive sensor and incorporates an IP65 connector for wiring with a ¼” BSP threaded connection. They are ideal for use in areas requiring exact pressure measurement, low hysteresis, and long-term stability in all applications where air, oil, or water is to be monitored.
