The NRM-10 is a Digital, advanced in features, compact, and economical adjustable relay module. It takes 0-10VDC input and turns on/off relay at user-adjusted ON and OFF switch points.
The Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks.
The IOPC2 converts two 0-10V dc Input Signals to drive two separate 0-20V 50Hz phase-cut outputs, at 30VA per channel for the control of small valve or damper actuators.
The IOR4 is intended for use with BMS controllers to convert an analogue control output to a binary, staged, or sequenced relay modes. LEDs indicate correct operation and Hand/Off/Auto jumpers ease commissioning.
This IO module is used with DDCs to convert an analogue control output to a staged, reverse staged or sequenced relay output.
LEDs indicate correct operation and low current draw from 0-10Vdc controller means that the IOR6 can work successfully with most BEMs controllers.