Panel Lamp Current Meter Green up to 50Amps with a 50Amp solid-core CT.
£16.00 Exc. VAT
Panel indicators for displaying Voltage and Current on the door of a control panel are available in 5 colours for up to 500Vac and 120Vdc. The Current meter comes with a 50Amp solid-core CT.
These miniature panel indicators are an ideal low-cost solution for displaying Voltage and Current on the door of a control panel. They are available in 5 colours for up to 500Vac and 120Vdc. The Current meter comes with a 50Amp solid-core CT.
Working Current: 50Amp
Frequency: 50/60Hz
Supply Current: < 20mA
Mounting Hole: 22mm
CT Lead Length: 80cm
| Weight | 0.1 kg |
|---|
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
Panel Lamp Current Meter Red up to 50Amps with a 50Amp solid-core CT.
Panel Lamp Volt Meter Green – Select Voltage when ordering
Panel indicators for displaying Voltage and Current on the door of a control panel are available in 5 colours for up to 500Vac and 120Vdc. The Current meter comes with a 50Amp solid-core CT.
Related products
CSW Solid Core and Split Core Current Switches 1-200A
The CSW series of AC current switches activate a normally open (NO) contact closure via a solid-state switch whenever the monitored primary circuit current exceeds a pre-set level.
Current Monitoring Relay
The Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks. It can also be used with a current transformer to monitor higher currents. It has an LED indication and is Din-rail mounting.
Panel Lamp Volt Meter Blue – Select Voltage when ordering
Panel indicators for displaying Voltage and Current on the door of a control panel are available in 5 colours for up to 500Vac and 120Vdc. The Current meter comes with a 50Amp solid-core CT.
Panel Lamp Volt Meter Red – Select Voltage when ordering
Panel indicators for displaying Voltage and Current on the door of a control panel are available in 5 colours for up to 500Vac and 120Vdc. The Current meter comes with a 50Amp solid-core CT.
Panel Lamp Volt Meter White – Select Voltage when ordering
Panel indicators for displaying Voltage and Current on the door of a control panel are available in 5 colours for up to 500Vac and 120Vdc. The Current meter comes with a 50Amp solid-core CT.
Panel Lamp Volt Meter Yellow – Select Voltage when ordering
Panel indicators for displaying Voltage and Current on the door of a control panel are available in 5 colours for up to 500Vac and 120Vdc. The Current meter comes with a 50Amp solid-core CT.
Solid Core and Split Core Current Sensors, 0-10, 0-20, 0-50, 0–100, 0-150, 0-200 A, output 0-10VDC or 4-20-mA
The CS series current sensors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear 4-20mA or 0 to 10 VDC output signal, which can be monitored by a Building Management System.
Solid Core and Split Core Current Sensors, 0–100, 0-200, 0-250 A, average output with 0-10VDC or 4-20-mA
The CTA (Current Output - 4-20mA) /CTV (Voltage Output 0-10VDC) Series current sensors monitor the current flowing to electrical equipment or buildings.
