Current Monitoring Relay
£35.00 Exc. VAT
The Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks. It can also be used with a current transformer to monitor higher currents. It has an LED indication and is Din-rail mounting.
Description
The Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks. It can also be used with a current transformer to monitor higher currents. It has LED indication and is Din rail mounting.
Specification
Supply Voltage:                24 – 240Vac, or 24Vdc
Frequency:                    50 – 60Hz
Current Range:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0.5 to 5 Amp
Time Delay:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0.1 to 10 seconds
Contact Rating:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10 Amps (AC1)
Contact:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SPDT
| Weight | .10 kg |
|---|---|
| Type | CS-SD10L, CS-SD10, CS-SD420L, CS-SD420, CS-SD420LT, CS-SD420, CS-SD420T, CS-SP10L, CS-SP10, CS-SP420L, CS-SP420 |
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
Duct Connection Set
Multi Range Pressure Transducer
PTH is a series of pressure transducers that are ideal for monitoring and controlling pressure differentials in ventilation systems.
PTH transducers take up very little space and are designed for direct installation at the measuring point and are also compact and easy to install as there is ample room for attaching cables.
Related products
Duct Sensors 150mm
The TE-D range of duct temperature sensors is designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The housing has a quick-release lid for ease of installation and a gasket for sealing to the duct. The probe is stainless steel for maximum corrosion resistance and is available in two standard lengths.
Immersion Temperature Sensors 150mm Long
The TE-I range of immersion temperature sensors are designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The housing has a quick-release lid for ease of installation and a gasket for sealing to the duct. The probe is stainless steel for maximum corrosion resistance, stainless steel pockets are available.
Polished Brass Button Temperature Sensor
The button temperature sensors are designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The sensor is housed in a button enclosure.
Polished Brass Thimble Temperature
The TE-T range of thimble temperature sensors is designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The sensor is housed in a polished brass thimble type enclosure with optional white plastic, brass, polished brass, or stainless steel versions also available.
Solid Core and Split Core Current Sensors, 0–100, 0-200, 0-250 A, average output with 0-10VDC or 4-20-mA
The CTA (Current Output - 4-20mA) /CTV (Voltage Output 0-10VDC) Series current sensors monitor the current flowing to electrical equipment or buildings.
Space Humidity Sensor, selectable output with direct thermistor 2 percent
This type of humidity and temperature sensor uses state-of-the-art single-chip multi-sensor technology. The sensing element is a polymer sensing chip with built-in electronics to give accurate signals and fast responses. This product has been designed with state-of-the-art electronics, and built in the UK to assure excellent reliability and quality.
Stainless Steel Button Temperature Sensor
The button temperature sensors are designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The sensor is housed in a button enclosure.
White Plastic Thimble Temperature
The TE-T range of thimble temperature sensors is designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The sensor is housed in a white plastic thimble type enclosure with optional white plastic, brass, polished brass, or stainless steel versions also available.

Reviews
There are no reviews yet.