Showing 13–20 of 20 results

Show sidebar
Show 9 12 18 24
https://client.voidloop.site - iopc1-120
https://client.voidloop.site - IOPC-Manual
Compare

Phase Cut Module 120VA – IOPC1-120

£125.00 Exc. VAT

The IOPC1-120 is designed to convert a single 0-10Vdc Input Signal to drive a 0-20V 50Hz phase-cut output, at 120VA, to drive larger valve and damper actuators.

Add to wishlist
Add to basket
Quick view
https://client.voidloop.site - IO-AUD
https://client.voidloop.site - AUD-Wiring
Compare

Raise/Lower to Analogue Module – AUD

£175.00 Exc. VAT

The AUD converts a floating-point signal into a linear analogue output. There are Two inputs on the AUD, one to increase the analogue output and one to decrease the analogue output.

Add to wishlist
Add to basket
Quick view
https://client.voidloop.site - IOMR1
https://client.voidloop.site - IOMR1
Compare

Single Channel Override Relay Module – IOMR1

£13.50 Exc. VAT

The IOMR1 is designed to provide a manual override of the output from a BMS Controller (or similar) and is particularly useful for commissioning or temporary control applications.

Add to wishlist
Add to basket
Quick view
https://client.voidloop.site - ior6
https://client.voidloop.site - IOR6-Wiring
Compare

Six Stage Relay Module – IOR6

£55.65 Exc. VAT

This IO module is used with DDCs to convert an analogue control output to a staged, reverse staged or sequenced relay output.
LEDs indicate correct operation and low current draw from 0-10Vdc controller means that the IOR6 can work successfully with most BEMs controllers.

Add to wishlist
Add to basket
Quick view
https://client.voidloop.site - ior3
https://client.voidloop.site - IOR3_Wiring
Compare

Three Stage Relay Module – IOR3

£34.60 Exc. VAT

This IO module is used with DDCs to convert an analogue control output to a binary, heat/cool, staged, or sequenced relay output. Typically it is used in such controls as valve and contacts changeover.

Add to wishlist
Add to basket
Quick view
https://client.voidloop.site - IOR2
https://client.voidloop.site - IOR2_Wiring
Compare

Two Stage Relay Module – IOR2

£29.00 Exc. VAT

This IO module is used with DDCs to convert an analogue control output signal to a time proportional raise/lower, high/low or binary relay output.

Add to wishlist
Add to basket
Quick view
https://client.voidloop.site - iofs24-10
Compare

Volt Free To Voltage Converter – IOFS24-10

£35.00 Exc. VAT

The IOFS24-10 has been designed to give 3 dc voltages using volt-free inputs. The inputs can be adjusted between 0-10 volts.

Add to wishlist
Add to basket
Quick view
https://client.voidloop.site - io-vi
Compare

Voltage to Current Conversion Module – IO-VI

£43.00 Exc. VAT

The IO-VI module will convert a 0-10 Volt Signal to 4-20mA current output. Din rail mounting with rising clamp terminals 24Vac/dc supply.

Add to wishlist
Add to basket
Quick view