Current Monitoring Relay
£35.00 Exc. VAT
The Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks. It can also be used with a current transformer to monitor higher currents. It has an LED indication and is Din-rail mounting.
Description
The Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks. It can also be used with a current transformer to monitor higher currents. It has LED indication and is Din rail mounting.
Specification
Supply Voltage:                24 – 240Vac, or 24Vdc
Frequency:                    50 – 60Hz
Current Range:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0.5 to 5 Amp
Time Delay:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0.1 to 10 seconds
Contact Rating:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10 Amps (AC1)
Contact:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SPDT
| Weight | .10 kg |
|---|---|
| Type | CS-SD10L, CS-SD10, CS-SD420L, CS-SD420, CS-SD420LT, CS-SD420, CS-SD420T, CS-SP10L, CS-SP10, CS-SP420L, CS-SP420 |
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
Multi Range Pressure Transducer
PTH is a series of pressure transducers that are ideal for monitoring and controlling pressure differentials in ventilation systems.
PTH transducers take up very little space and are designed for direct installation at the measuring point and are also compact and easy to install as there is ample room for attaching cables.
Related products
Duct Sensors 450mm
The TE-D range of duct temperature sensors is designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The housing has a quick-release lid for ease of installation and a gasket for sealing to the duct. The probe is stainless steel for maximum corrosion resistance and is available in two standard lengths.
Immersion Temperature Sensors 65mm Long
The TE-I range of immersion temperature sensors are designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The housing has a quick-release lid for ease of installation and a gasket for sealing to the duct. The probe is stainless steel for maximum corrosion resistance, stainless steel pockets are available.
Polished Brass Thimble Temperature
The TE-T range of thimble temperature sensors is designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The sensor is housed in a polished brass thimble type enclosure with optional white plastic, brass, polished brass, or stainless steel versions also available.
Strap On Temperature Sensor
The TE-S range of strap-on temperature sensors is designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The lead is 1m long with tails and the sensor is housed in a shaped brass lug for surface temperature measurement.
Strap On Temperature Sensor with IP65 Housing
The TE-S range of strap-on temperature sensors is designed to interface with a wide variety of HVAC control equipment. Units are available with a high-quality thermistor element or platinum element. The housing has a quick release lid for ease of installation and the sensor is housed in a shaped copper lug for surface temperature measurement.
Reviews
There are no reviews yet.