Analogue to 20 Relay Card – IOAD20
£128.00 Exc. VAT
The IOAD20 has been designed primarily for fault indication of up to 20 alarms from 1 analogue signal.
Description
The IOAD20 has been designed primarily for fault indication of up to 20 alarms from 1 analogue signal.
It provides 20-volt free change over contacts and 1 common output contact.
It can be reset using a second analogue signal or by a remote push button. It can also be used to convert one 0-10V signal to 20 outputs and using a second 0-10V signal to reset.
Specification
Output: 21 x Volt free change over contacts 5 Amp
Supply Voltage: 24Vac/dc @ 600mA max.
Termination: Rising clamp for 0.5 to 2.5mm² cable.
Dimensions: 326 x 93 x 50mm
| Weight | 0.5 kg |
|---|---|
| Dimensions | 33 × 10 × 5 cm |
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
10 channel alarm integrator module 24Vac/dc – IO-ALM10-24
The IO-ALM10 series of Alarm Integrators monitor up to 10 Input Channels up to 24VAC/DC per channel and provide a relay output in the event of an alarm signal appearing on any one or more inputs.
The IO-ALM10 Alarm Integrators is self-powered from the alarm input and are designed for mounting on the TS35 (35mm Slotted Din Rail) section DIN rail.
24 Channel Digital Input Multiplexer – VFC input
The IOD24 module was created and designed to provide a cost-effective and efficient way of handling a large amount of digital input into a Building Management System (BMS). 24 Digital Inputs are multiplexed to provide a single analogue output (0-10V or 4-20mA) which is compatible with most open standard BMS controllers on the market currently.
Reviews
There are no reviews yet.