FCU 24VAC Honeywell Linear Actuator M7410C1015
£119.00 Exc. VAT
Electrothermal Actuators are for use with the VFX range of Fan Coil valves and are used in heating, cooling, and air conditioning systems.
Out of stock
- Trend Actuator 3-pt for zone control, 6,5 mm 180/300 N, M6410/M7410
- Electrical actuator floating control.
- Protection class: IP43/IP42
- Position indication: with red indicator
- End switch function/capacity: SPDT; capacity 1 A inductive, 5 A resistive
- For M7410 models, the valve cap can be used for manual adjustment. For models with 2 end switches, the 2nd switch is adjustable.
- Control input signal: 3-pt
- Stroke: 6.5mm
- Runtime: 150s
- 6,5 mm; 300 N; for valve series: V5825B, V5832B2, V5833A2
- Stem force: 300N
- Supply voltage: 24 Vac
- Manual operation: no
- End switches: no
- Cable length: 1.5m
BMS Parts PDF Download
| Weight | 0.25 kg |
|---|
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
FCU 230Vac On/Off Electrothermal Actuator
FCU 24Vac On/Off Electrothermal Actuator
Related products
Characterised 20mm 3 port valve Kvs 6.3 Suitable Actuators LR../LRF.. – R3020-6P3-S2
FCU 24Vac 0..10Vdc Electrothermal Actuator
FCU 24VAC Honeywell Linear Actuator M7410C1007
Liquid Differential Pressure Switch
This series of pressure switches are used to monitor the difference between two pressures. For example, they can be used to monitor filter conditions and signal when the filter is becoming blocked. They can also be used as flow monitoring switches if used across orifice plates etc.
Liquid Differential Pressure Switch 0.3-4.5 bar – FD113
Liquid Differential Pressure Switch LDP
The series LDP is a differential pressure switch that makes a contact output based on the differential between two pressure sources.
Wetted materials of brass and fluoroelastomer are suitable for use with most gases and water-based solutions.
Liquid Static Pressure Sensor 0/10Vdc
The PT603 range of Liquid Pressure sensors uses a piezo-resistive sensor and incorporates an IP65 connector for wiring with a ¼” BSP threaded connection. They are ideal for use in areas requiring exact pressure measurement, low hysteresis, and long-term stability in all applications where air, oil, or water is to be monitored.
