Emergency Light Socket Components to build your own emergency light socket
Original price was: £18.65.£15.76Current price is: £15.76. Exc. VAT
All components (excluding 2 gang socket) are required to build your own Emergency Safety Socket.
The appliance operates similarly to the existing socket until it detects the power is removed when it automatically switches to battery operation and illuminates the bright light-emitting diodes.
The rechargeable battery enables the light-emitting diodes to stay on independently for up to three hours or until the electrical power returns.
All components (excluding the 2-gang socket) are required to build your own Emergency Safety Socket.
The appliance operates similarly to the existing socket until it detects that power has been removed, at which point it automatically switches to battery operation and illuminates the bright light-emitting diodes.
The rechargeable battery enables the light-emitting diodes to remain on independently for up to three hours or until power returns.
PCB Board size is 27mm Long x 20mm Wide by 1.5mm thick.
[embedyt] https://www.youtube.com/watch?v=-INcGYSAly4[/embedyt]
Components supplied:
R1 Resistor 0.4w – 240VAC 270 ohm
R2 Resistor 0.4w – Current to base 1k ohm
D5, D2, D1, D3, D451N4004 – AC to DC and stops 3.7v to baseDO41-101N4007
Q S90121TRANSISTOR_PNP TO-92S9012
C 1 820nf1Capacitor 7mm Block Capacitor 7mm block820 nF
C2116-35v CapacitorThrough Hole Capacitor470 uF
F11FUSE 240vacPICOFUSE500mA
D61ZENER-DIODE F126Z104.7V
QC1 PCB for emergency light board
LED COB11/3w White COB Lamp DC 3V LED Panel Light 19mm x 19.5mm / 3v to 3.7v
5VDc Green LED
PCB Switch
The battery is not supplied in the above picture.
Components NOT supplied:
The socket is used for emergency lighting.
BAT3.71Rechargable BATTERY 3.7v – 2000mAhBATTERY-AA-PANEL
Solder for the components to the PCB board.
Wires.
Glue for the LED COB strip and PCB/battery fixation at the back of the socket.
Tools Required
Soldering iron.
Mains socket to install the kit into.
BAT3.71Rechargable BATTERY 3.7v – 2000mAhBATTERY-AA-PANEL
3 mm drill bit and a drill for the socket to install the LED COB wires back into the socket area, where the PCB board is mounted.
I use a hot glue gun to fix the PCB board and battery.
Some basic knowledge of soldering and electronic circuits.
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
You may also like…
Rechargeable Battery 2800mAh ICR 3.7V Li-ion With Soldering Tabs
18650 Battery 2800mAh ICR 18650 3.7V Li-ion Rechargeable Battery With Soldering Tabs.
Features      Â
- 100% Brand new!
- Rechargeable 18650 lithium battery with two DIY soldering nickel tabs, stable discharge rate, no ''memory effect''.
- Low reoccurring operation cist, short-circuit, and over-current protection.
- Safe and environmentally friendly, tested under strict quality control standards.
- High energy density and long-lasting power batteries, ensure extreme long charging circles, great for long-term daily use.
Provides excellent continuous power source solutions to your devices. - Widely used on a torch, power bank, microphone, radio, gamepad, laser pointer, flashlight, headlamp, LED light, video doorbell, camera, toy, remote control, mini fan, portable printer, emergency light, interphone, portable DVD, laptop, instrument, audio equipment, aerial model, and other electronic devices that need 18650 cells.
Reviews
There are no reviews yet.